Zero Paints

Zero Paints 3035 Diamond Finish - 2 Pack GLOSS Clearcoat System (2K Urethane)

3035 Diamond Finish - 2 Pack GLOSS Clearcoat System (2K Urethane) - Image 1
Ražotājs: Zero Paints
Produkta kods: ZER-3035
Pašreizējā pieejamība: ir pieejams!
€44.87 vai 29600 p.

Ar 21% PVN
nosūtot uz valsti: Latvija
Lai mainītu valsti, noklikšķiniet šeit

Pamatinformācija

RažotājsZero Paints
Produkta kodsZER-3035
Svars:0.47 kg
Tilpums220ml
Pievienots katalogam:29.7.2019

Diamond Finish - 2 Pack GLOSS Clearcoat System (2K Urethane) 220ml

We have been striving to find the best 2K clearcoat system available and this is it, once applied it has an amazing wet look finish.

Pack Contents :

  • 1 x 100ml Diamond Finish Clear Coat (High Solid)  also known as Urethane or Polyurethane (Supplied in Glass Bottle)
  • 1 x 60ml Hardener (Supplied in Glass Bottle)
  • 1 x 60ml Thinners (Supplied in Glass Bottle)
  • Instructions

Mixing Ratio
100 Parts Clear, 50 Parts Hardener + 10% Thinners

(e.g. 20ml Clear, 10ml Hardener + 3ml Thinners).
Drying Times : Air Drying  at 20°C, Dust Free 30 Mins, Tack Free : 10-12 Hours, Thoroughly Dry : 48 Hours. Can be polished after 12 hours at 20 °C

ONLY MIX WHAT YOU NEED EACH TIME, once it's mixed it has a life of about 15/20 mins max then it has to be discarded.

Is it possible to pre-mix your 2 pack gloss clearcoat then keep it in a jar for later use if not all used in one go, or is it a case of just mixing enough to do the job?

NO YOU MUST NOT DO THIS, once you mix the clear coat and hardener a chemical reaction is started, similar to epoxy glue or epoxy putty. It will hardened within 15/20 mins, if you mixed the lot you would be wasting product and money, so only mix whet you need each time, you will quickly find the amounts you need with a small amount of practice. 
We would recommend starting with 10ml/gram or Clearcoat - 5ml/gram Hardener and 3ml of Thinners and see how much coverage you get wer fin this is plenty to clearcoat a 1:24 model with 3/4 coats.

Is this safe over decals

Yes, 2K Clearcoat is safe over decals, it has been tested on all the major brands : Tamiya, Fujimi, Aoshima, Studio 27, Cartograf, Scale Motorsport MFH, etc. Please remember to apply a few mist coats over the decals before the wet coats.

It has NOT been tested on homemade inkjet printed decals as so many brands exist, so please test on scrap first.


Is this safe over other paints
Yes, 2K Clearcoat is safe over most other paints (acrylic paint, Tamiya TS) once they are fully dry so please test on scrap first.
 

What do I clean my Airbrush and equipment with after use

The following products will work :- Airbrush CleanerCellulose ThinnersBasecoat Thinners, 2k Thinners
but our Airbrush Cleaner is designed for the job and the cheapest

Zero Paints ir uzņēmums, kas specializējas krāsās, aksesuāros un modelēšanas ķimikālijās, kas galvenokārt paredzētas modernu auto modeļiem interesantās sporta virsbūves krāsās. Raksturīga iezīme ir to ļoti augstā kvalitāte un specifisku krāsu un toņu gatavība. Šīm krāsām ir arī matēta apdare, kas nozīmē, ka gan gala pārklājums ar bezkrāsainām lakām, gan pulēšana, lai iegūtu gaidīto augsto spīdumu, līdzīgi kā mūsdienu sporta automašīnu virsbūvēs. Pulēšanas pastu komplekts ar trīspakāpju gradāciju ļauj pakāpeniski, rūpīgi un ļoti efektīvi iegūt spoguļveida virsmas spīdumu. Uzņēmums ir sagatavojis arī piederumu komplektu, kas paredzēts preparātu lietošanai. Starp tiem ir pulēšanas lupatas un sūkļi.

Kļūda aprakstā? Paziņojiet par problēmu
Mūsu klientu atsauksmes
Palikt savu atsauksmi par: 3035 Diamond Finish - 2 Pack GLOSS Clearcoat System (2K Urethane)
...
Pievienots katalogam: 29.7.2019
Pašreizējā pieejamība: ir pieejams!
  • produkts ir pieejams
  • produkts nav pieejams
  • produkts ir pieejams pēc pasūtījuma
  • preces piegāde
  • nav
  • 1 vienība
  • 2 vienības
  • 3-5 vienības
  • 6-10 vienības
  • vairāk nekā 10 vienības
Vai iespējams pasūtīt produktu, kura nav vietnē vai noliktavā?