Green Stuff World

Green Stuff World 1423 BULLETS Texture Rubber Stamp

BULLETS Texture Rubber Stamp - Image 1
Ražotājs: Green Stuff World
Produkta kods: GSW1423
Pašreizējā pieejamība: nav pieejams
Bija pieejama: 24.10.2020
€14.04 vai 9300 p.

Ar 21% PVN
nosūtot uz valsti: Latvija
Lai mainītu valsti, noklikšķiniet šeit

Ja prece šobrīd nav pieejama, ierakstiet savu e-pasta adresi, un saņemsiet paziņojumu, kad prece vēl būs pārdošanā!

Vai iespējams pasūtīt produktu, kura nav vietnē vai noliktavā?

Pamatinformācija

RažotājsGreen Stuff World
Produkta kodsGSW1423
Svars:0.07 kg
Ean:8436554364237
Pievienots katalogam:20.5.2019

BULLET rubber mold

Flexible mold to create infinite bullets and bullet shells with epoxies putties, polymer clays and resins. Green Stuff putty, Brown Stuff putty and Procreate putty will NOT work properly with this mold due to its gummy texture. Overcooking of polymer clay may burn it and also leave it stuck to the mold. Also this is NOT valid for polyurethane resins.

Overall Dimension of the mold: 6x12cm (2,5x5 inches)
Mold thickness: 5mm
Resistant to temperatures up to 240ºC

Contains 1 mold with bullets and bullet shells in 5 different sizes (2, 2'5, 3, 4 and 5mm length).

HOW TO USE IT: 

Due to the depth of the mold, and the complexity of the pieces, in order to get the most bullets as possible each time, we recommend filling each hole of the mold 1 by 1. The process would be as follows:

1.- Knead the Putty/Clay into a ball

2.- Press the ball against the mold with any blunt object, for example the edge of a Rolling pin, trying to fill the holes of the desired bullets.

3.- Push the Putty/Clay into the bullets holes of the mold 1 by 1 by using any tool with of round tip or a toothpick. 

4.- Remove excess of Putty/Clay with a scrapper to clean the mold without cutting it.

5.- Repeat step 2 and 3 at least 3 times. The better the mold is filled, and the more times we repeat the entire process, the better quality and the more perfect bullets we would get. If the process is not done properly, some bullets will just come out incomplete.

As something additional, once the mold is filled and while we still have the Putty/Clay in fresh conditions, in order to get more detail in the pieces, bullets may be punctured with the tip of a mechanical pencil or even a small tube, to mark the firing pins in the back of the bullets.

Kļūda aprakstā? Paziņojiet par problēmu
Mūsu klientu atsauksmes
Palikt savu atsauksmi par: BULLETS Texture Rubber Stamp
...
Pievienots katalogam: 20.5.2019
Pašreizējā pieejamība: nav pieejams
  • produkts ir pieejams
  • produkts nav pieejams
  • produkts ir pieejams pēc pasūtījuma
  • preces piegāde
  • nav
  • 1 vienība
  • 2 vienības
  • 3-5 vienības
  • 6-10 vienības
  • vairāk nekā 10 vienības
Vai iespējams pasūtīt produktu, kura nav vietnē vai noliktavā?